No Foam | Pool and Spa Foam Remover | 1L

WAVE Spa No Foam has been specially designed for spa pools to control and prevent foaming.

Application Details

Either initially or on refilling the spa, add WAVE Spa No Foam at a rate of 50mls per 450 litres of water. Add whilst the filtration system is running and allow to run on for at least 1 hour. Use 25mls per week or as a defoamer as required.

Tip: Use a flocculant such as WAVE Spa Sparkle to reduce the build up of foam producing residues.

Always wash your hands after applying spa chemicals. The instructions and dose rates given are a general guide for most effective use. Spa water conditions, bathing loads, temperature etc vary therefore the chemical dosage required will alter accordingly. Shake bottle before use.